Jump to content

billjam

FINANCIAL MEMBER
  • Content Count

    11
  • Joined

  • Last visited

About billjam

  • Rank
    Prototype
  • Birthday 23August

Profile Information

  • Location:
    Perth
  • Ride/s
    88 911 with 3.6, 2021 Macan S

Recent Profile Visitors

323 profile views
  1. I have two LH and two RH camshafts from SC or 3.2. They are available separately. Prices don't include shipping from Perth. LH Camshaft #1 … 930 105 148 9R This cam has been reground and never fitted. Base circles measure 31.2mm and 31.6mm. I think the standard base diameter is 32.1mm. Lobe heights are standard at around 7.8 and 6.9mm (measured with my vernier gauge). $350 LH Camshaft #2 … 930 105 148 9R All lobes and journals in good condition except for one lobe which has shallow pitting. The bases of all lobes measure 32.1mm, so not reground. $200 RH Camshaft #1 … 930 105 147 9R All lobes and journals in good condition with only minor wear on lobes. No pitting. The bases of all lobes measure 32.1mm, so not reground. $250 RH Camshaft #2 … 930 105 147 9R One lobe has a very small shallow pit and another has some fairly ugly looking pitting around the lobe but it is quite shallow. It just looks ugly but will clean up with a regrind. Money back if it isn’t regrindable. All other lobes and journals are in good condition. The bases of all lobes measure 32.1mm, so not reground. $200
  2. I bought them new for an ITB project on my 3.6 conversion, but forgot that the 3.6 had three bolt inlet flanges, so ended up making my own manifolds. These will fit all 911s up to 1989 with two stud inlets. Inlet diameter = 41mm Outlet diameter = 46mm ITB spacing is 94mm centre to centre. $200 plus shipping.
  3. I have a complete exhaust system from a 1992 964 which was removed and stored since 2010. It is in good condition and includes all parts shown in the pics. Parts are in Perth, so I'd prefer to sell locally to avoid the hassle of packing and shipping, but I can wrap it on a pallet if required. Asking $250 plus shipping.
  4. Thanks for the interest guys, but everything has gone to three separate Porsche nuts here in Perth. Even the bra!
  5. Thanks Jonathon, but you are already second in line in Melbourne. I am holding off for just a couple of days in the hope that someone local wants parts before I get tied up with packing and shipping. Bill
  6. Moving house soon so motivated to clear out stuff that is left over from projects. Everything is used, cheap or free and is located in Perth. I'd prefer local pickup. Packing and shipping is on the buyer. I bought this Sanden aircon compressor with mounting brackets to suit an early 3.6, but I ended up going with a Classic Retrofit electric compressor. It is used but in good condition. R12 refrigerant. FREE 3.2 Carrera rear a/c condenser with no leaks or bent fins. $50 3.6 Oil Pipe from 1992 engine. Threads and flexible hose in good condition. FREE 3.6 power steering pump with drive pulley and belt. It was working when removed from a 1992 engine about 12 years ago. Good core. FREE 3.6 Throttle Body and associated hoses and fittings. FREE G50 Starter Motor from my 1988 Carrera. Works OK but got replaced by a Hi-Torque starter when I did a 3.6 conversion. Some wear on pinion. $100 1988 Carrera steering wheel - lots of patina!! All leather intact, some split stitching. Horn pad and clips all OK. $50 New Turbo Tie Rod - one only. 930 347 031 01. $30 H4 Headlight Lens - brand new but LHD!! Let's see if there are any septics on here looking for a bargain. I also have two complete LHD sugar scoop headlights and trims. FREE. Colgan Bra in good condition. It came with one of my cars, honest! I have never taken it out of its bag until today. Definitely FREE.
  7. Before I pull the pin on shipping new ones in from Pelican, anything available locally? I am looking for new or good used front shocks for my 88 Carrera with Boge struts. Prefer Koni adjustable KON-8641-1039SPORT.
  8. I bought an engine-mounted oil cooler that is full of shrapnel. Does anyone have a contact for ultrasonic cleaning of these, preferably in Perth?
  9. I bought an engine-mounted oil cooler that is full of shrapnel. Does anyone have a contact for ultrasonic cleaning of these, preferably in Perth?
  10. Not having much luck with these. First one I bought was full of shrapnel, and the second one has a hole in it. What's available out there at the moment? It doesn't matter what type of inlet pipe it has because it will be cut off for my 3.6 engine as in pic below. Prefer something from a 2.7, 3.0 or 3.2. Email me with what you have ... jamesx6@iinet.net.au Another option is to get the dirty one cleaned out. Does anyone know who does this, preferably in Perth?

PFA [Porsche Forum Australia]

This is an online platform for like-minded Porsche fans/fanatics/tragics to come together to read, chat and share.

It is also a platform to arrange and participate in off-line social meet-ups, events and drives.

×
×
  • Create New...