Jump to content
JonoF

FS - $22K - 1966 912 (LHD) Project - Rust Free -

Recommended Posts

FS: $22K OBO 

Price reduced as 914 motor and 901 tranny have been sold back to previous owner. 

 

Ladies and Gents

I recently purchased a lovely 66 912 project to build as a little hotrod. 

I am getting cold feet as I have just realised I have neither the space nor the time to do anything with the project in the near future.  In addition, I am renting a super cool warehouse space to store and work on the car, but it’s not cheap. 

Here are the details of the car: 

·       Make: Porsche

·       Model: 912

·       Year: 66 (built late 65);

·       Colour: originally Light Ivory, but currently donning primer;

·       Country of Delivery: German (LHD);

·       Engine: Non-matching 2.0L Porsche 914 engine.  Engine has slightly more aggressive cams and additional fan shroud.

·       Gearbox: Porsche 901 tranny;

The car is currently set up as a rust-free rolling chassis and is now ready for panel fitment, body prep and paint.

The shell was sandblasted and all rust was removed from the car – floor pans; suspension pans; inner and outer door sills; door jams / strikers; rear quarters; rear window bottoms; plus misc patches here and there were removed and new panels welded in by Kustom Kombis in the Central Coast.

It appears the previous owner was planning on building a 912-6 (i.e. a 912 with a 6 cylinder 911 engine), or the shell may have been “updated” in a past life, as the engine mounts are from a 911. 

I pounced on this car a few months ago.  Of all the longhood project cars that I’ve at over the past 5 years, this was the first truly rust free one.  Hard to say no to that!

The car is currently a roller and comes with all body panels (except a front bumper) and all major components. 

This will make a serious hot little SWB hotrod. And, most importantly, a blank canvas. If you have the time and space, this will be a very cost effective hotrod build! 

PM or call (0403 278 349) if interested

Cheers

Jono

 

 

 

 

 

Share this post


Link to post
Share on other sites
8 hours ago, JonoF said:

FS: $28,000.00

 

Ladies and Gents

I recently purchased a lovely 66 912 project to build as a little hotrod. 

I am getting cold feet as I have just realised I have neither the space nor the time to do anything with the project in the near future.  In addition, I am renting a super cool warehouse space to store and work on the car, but it’s not cheap. 

Here are the details of the car: 

·       Make: Porsche

·       Model: 912

·       Year: 66 (built late 65);

·       Colour: originally Light Ivory, but currently donning primer;

·       Country of Delivery: German (LHD);

·       Engine: Non-matching 2.0L Porsche 914 engine.  Engine has slightly more aggressive cams and additional fan shroud.

·       Gearbox: Porsche 901 tranny;

The car is currently set up as a rust-free rolling chassis and is now ready for panel fitment, body prep and paint.

The shell was sandblasted and all rust was removed from the car – floor pans; suspension pans; inner and outer door sills; door jams / strikers; rear quarters; rear window bottoms; plus misc patches here and there were removed and new panels welded in by Kustom Kombis in the Central Coast.

It appears the previous owner was planning on building a 912-6 (i.e. a 912 with a 6 cylinder 911 engine), or the shell may have been “updated” in a past life, as the engine mounts are from a 911. 

I pounced on this car a few months ago.  Of all the longhood project cars that I’ve at over the past 5 years, this was the first truly rust free one.  Hard to say no to that!

The car is currently a roller and comes with all body panels (except a front bumper) and all major components. 

This will make a serious hot little SWB hotrod. And, most importantly, a blank canvas. If you have the time and space, this will be a very cost effective hotrod build! 

PM or call (0403 278 349) if interested

Cheers

Jono

 

 

 

 

 

can sell you a rust free 912 that needs no work doing to it mate  - #tangy

Share this post


Link to post
Share on other sites
13 hours ago, turboT said:

can sell you a rust free 912 that needs no work doing to it mate  - #tangy

Do you offer a payment plan...?

Share this post


Link to post
Share on other sites
14 hours ago, turboT said:

can sell you a rust free 912 that needs no work doing to it mate  - #tangy

How much?

Share this post


Link to post
Share on other sites
1 hour ago, ELSPORTO said:

How much?

$70K ono

Need to start planning for the new arrival..

 

2 hours ago, JonoF said:

Do you offer a payment plan...?

yep

50% upfront down payment

25% 3 months later

Final 25% 3 months after that

then you get the keys and car :) 

Share this post


Link to post
Share on other sites
3 hours ago, turboT said:

$70K ono

Need to start planning for the new arrival..

 

yep

50% upfront down payment

25% 3 months later

Final 25% 3 months after that

then you get the keys and car :) 

Best thread hi jack ever. ;) 

Share this post


Link to post
Share on other sites
On 07/12/2018 at 13:30, turboT said:

$70K ono

Need to start planning for the new arrival..

 

yep

50% upfront down payment

25% 3 months later

Final 25% 3 months after that

then you get the keys and car :) 

Lovely car .... 

Bump for Jono's 912 too - good starting price at $28k that's for sure .....

Share this post


Link to post
Share on other sites

Engine and tranny now sold. Price for near complete roller is $22K. But yourself a $20K 3.2L out of the US and make the sickest SWB hotrod ever. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×