billjam Posted 15May, 2022 Report Share Posted 15May, 2022 I have two LH and two RH camshafts from SC or 3.2. They are available separately. Prices don't include shipping from Perth. LH Camshaft #1 … 930 105 148 9R This cam has been reground and never fitted. Base circles measure 31.2mm and 31.6mm. I think the standard base diameter is 32.1mm. Lobe heights are standard at around 7.8 and 6.9mm (measured with my vernier gauge). $350 LH Camshaft #2 … 930 105 148 9R All lobes and journals in good condition except for one lobe which has shallow pitting. The bases of all lobes measure 32.1mm, so not reground. $200 RH Camshaft #1 … 930 105 147 9R All lobes and journals in good condition with only minor wear on lobes. No pitting. The bases of all lobes measure 32.1mm, so not reground. $250 RH Camshaft #2 … 930 105 147 9R One lobe has a very small shallow pit and another has some fairly ugly looking pitting around the lobe but it is quite shallow. It just looks ugly but will clean up with a regrind. Money back if it isn’t regrindable. All other lobes and journals are in good condition. The bases of all lobes measure 32.1mm, so not reground. $200 Quote Link to comment Share on other sites More sharing options...
billjam Posted 29May, 2022 Author Report Share Posted 29May, 2022 I thought these prices were reasonable, but if I'm off the mark, feel free to make an offer. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.