BBS e-88 CL Magnesium Wheels

[34jzgte]

Hi,

i would like to note that the Center bore and PCD of the rear of these are porsche fitment, 5x130 pcd i can have them machined through to suit 5 stud.

i have 2x4 sets of BBS e88 wheels for-sale, they have a deep center which will clear any brake caliper on the market as they are designed to clear super wide racing calipers.

They are center-lock wheels but they can have a 5 stud drilled into them, In trans-am racing the center-locks are illegal so they have them drilled for a 5 stud.

I can do this for you through cnc machine or you can have any good wheel place do it.

These are the lightest 18" wheels that can be had.

all wheels are black with silver rim halves.

Price: $3000 for a set of 4.

PM or phone: 0431 113 255 for details.

Set A:

18x11.5" with a +7mm offset.

Set B:

18x10.5" with a +16.6mm offset.

SOLD

Set C:

18x9.5" with a +19mm offset.

SOLD

set D:

18x11.5" with a -6mm offset.

set E

18x11" with a -4.7mm offset.

Waiting on the last set details.

Here are 2 sets of the wheels, they all look the same, no rash or dents

Here are photos for reference, they are the exact same wheel only in black, can be painted bbs gold:

Machined with 5x130pcd

[Uncle]

Can you get me a picture of the back of one of the centres and the centre bore size?

I want to see if I could use them with my centre lock hubs.

[34jzgte]

Center bore is around ~70mm Give or take a few mm, i am pretty sure its Porsche center-bore size i will have to use calipers for a more accurate measurement.

Also the locating holes are on a PCD of 130, like i said be fore, most porsche racing guys machine through a 5 stud hole for their 5 lug race cars.

[34jzgte]

set B and C sold.

[34jzgte]

Last set details,

Set F:

18x11.5" with a +9mm offset.

[34jzgte]

best looking wheels on a Porsche

[34jzgte]

Only one set of 4 left, im surprised there is no interest on this forum being that there porsche wheels.