Mike D'Silva Posted 21September, 2015 Report Share Posted 21September, 2015 My 964 had a bit of a steering wheel wobble at highway speeds.. usually this is a balance issue, but with new tyres and everything freshly balanced, it would still do it.. and not all the time. My old car had the same issue, and Rob Gray helped (did most of the work) me install some poly bushings from Chris Walrod in the USA.This time around, I wanted to have a go at doing it myself.. sorry, not a lot of pictures, but the best part was being able to give the control arms a bit of a clean.Glad to report that the car feels brilliant now. Very refined and no more wobbling. HIghly suggest you have a go at doing this job.http://rennlist.com/forums/993-forum/401383-964-993-control-arm-bushings.htmlbefore after Link to comment Share on other sites More sharing options...
Mike737 Posted 21September, 2015 Report Share Posted 21September, 2015 Nice work Mike Link to comment Share on other sites More sharing options...
michel Posted 21September, 2015 Report Share Posted 21September, 2015 very pretty - I found a (pelican?) thread last year where a guy lists all the substitute parts between 964-993's? to get optimum weight and geometry Link to comment Share on other sites More sharing options...
Tit Posted 21September, 2015 Report Share Posted 21September, 2015 Nice. This was one of the biggest improvements I made to my car... Link to comment Share on other sites More sharing options...
Fraz Posted 21September, 2015 Report Share Posted 21September, 2015 What did you use to clean the alloy Mike, came up a treat. Link to comment Share on other sites More sharing options...
Mike D'Silva Posted 21September, 2015 Author Report Share Posted 21September, 2015 What did you use to clean the alloy Mike, came up a treat.https://www.youtube.com/watch?v=BmDRPZG_xxYI used one of these.. but I didn't play the same music... Link to comment Share on other sites More sharing options...
T-Man Posted 21September, 2015 Report Share Posted 21September, 2015 Great option Mike. Did these a couple of years ago and holding up well. Link to comment Share on other sites More sharing options...
Fraz Posted 21September, 2015 Report Share Posted 21September, 2015 Few hours it that mate. Link to comment Share on other sites More sharing options...
DS911 Posted 22September, 2015 Report Share Posted 22September, 2015 Looks great. I bet you spent more time cleaning that actually attending to the bushings.Good to know this is a fix if my car starts to develop the same symptoms. Link to comment Share on other sites More sharing options...
Hughesy Posted 5October, 2015 Report Share Posted 5October, 2015 Mike , where'd you buy the soda blaster from. What size compressor do you need for good results. Cheers Hughesy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.