JonoF Posted 6December, 2018 Report Share Posted 6December, 2018 FS: $20K firm Price reduced as 914 motor and 901 tranny have been sold back to previous owner. Ladies and Gents I recently purchased a lovely 66 912 project to build as a little hotrod. I am getting cold feet as I have just realised I have neither the space nor the time to do anything with the project in the near future. In addition, I am renting a super cool warehouse space to store and work on the car, but it’s not cheap. Here are the details of the car: · Make: Porsche · Model: 912 · Year: 66 (built late 65); · Colour: originally Light Ivory, but currently donning primer; · Country of Delivery: German (LHD); · Engine: Non-matching 2.0L Porsche 914 engine. Engine has slightly more aggressive cams and additional fan shroud. · Gearbox: Porsche 901 tranny; The car is currently set up as a rust-free rolling chassis and is now ready for panel fitment, body prep and paint. The shell was sandblasted and all rust was removed from the car – floor pans; suspension pans; inner and outer door sills; door jams / strikers; rear quarters; rear window bottoms; plus misc patches here and there were removed and new panels welded in by Kustom Kombis in the Central Coast. It appears the previous owner was planning on building a 912-6 (i.e. a 912 with a 6 cylinder 911 engine), or the shell may have been “updated” in a past life, as the engine mounts are from a 911. I pounced on this car a few months ago. Of all the longhood project cars that I’ve at over the past 5 years, this was the first truly rust free one. Hard to say no to that! The car is currently a roller and comes with all body panels (except a front bumper) and all major components. This will make a serious hot little SWB hotrod. And, most importantly, a blank canvas. If you have the time and space, this will be a very cost effective hotrod build! PM or call (0403 278 349) if interested Cheers Jono Here is a Link to more photos, including the interior and the parts that come with the car: - PARTS: https://imgur.com/gallery/EyR7qxi - EXTERIOR and INTERIOR: https://imgur.com/gallery/HceOlwu Link to comment Share on other sites More sharing options...
edgy Posted 6December, 2018 Report Share Posted 6December, 2018 tell em the price son! Link to comment Share on other sites More sharing options...
turboT Posted 6December, 2018 Report Share Posted 6December, 2018 8 hours ago, JonoF said: FS: $28,000.00 Ladies and Gents I recently purchased a lovely 66 912 project to build as a little hotrod. I am getting cold feet as I have just realised I have neither the space nor the time to do anything with the project in the near future. In addition, I am renting a super cool warehouse space to store and work on the car, but it’s not cheap. Here are the details of the car: · Make: Porsche · Model: 912 · Year: 66 (built late 65); · Colour: originally Light Ivory, but currently donning primer; · Country of Delivery: German (LHD); · Engine: Non-matching 2.0L Porsche 914 engine. Engine has slightly more aggressive cams and additional fan shroud. · Gearbox: Porsche 901 tranny; The car is currently set up as a rust-free rolling chassis and is now ready for panel fitment, body prep and paint. The shell was sandblasted and all rust was removed from the car – floor pans; suspension pans; inner and outer door sills; door jams / strikers; rear quarters; rear window bottoms; plus misc patches here and there were removed and new panels welded in by Kustom Kombis in the Central Coast. It appears the previous owner was planning on building a 912-6 (i.e. a 912 with a 6 cylinder 911 engine), or the shell may have been “updated” in a past life, as the engine mounts are from a 911. I pounced on this car a few months ago. Of all the longhood project cars that I’ve at over the past 5 years, this was the first truly rust free one. Hard to say no to that! The car is currently a roller and comes with all body panels (except a front bumper) and all major components. This will make a serious hot little SWB hotrod. And, most importantly, a blank canvas. If you have the time and space, this will be a very cost effective hotrod build! PM or call (0403 278 349) if interested Cheers Jono : can sell you a rust free 912 that needs no work doing to it mate - #tangy Link to comment Share on other sites More sharing options...
JonoF Posted 6December, 2018 Author Report Share Posted 6December, 2018 13 hours ago, turboT said: can sell you a rust free 912 that needs no work doing to it mate - #tangy Do you offer a payment plan...? Link to comment Share on other sites More sharing options...
ELSPORTO Posted 7December, 2018 Report Share Posted 7December, 2018 14 hours ago, turboT said: can sell you a rust free 912 that needs no work doing to it mate - #tangy How much? Link to comment Share on other sites More sharing options...
turboT Posted 7December, 2018 Report Share Posted 7December, 2018 1 hour ago, ELSPORTO said: How much? $70K ono Need to start planning for the new arrival.. 2 hours ago, JonoF said: Do you offer a payment plan...? yep 50% upfront down payment 25% 3 months later Final 25% 3 months after that then you get the keys and car Link to comment Share on other sites More sharing options...
JonoF Posted 7December, 2018 Author Report Share Posted 7December, 2018 3 hours ago, turboT said: $70K ono Need to start planning for the new arrival.. yep 50% upfront down payment 25% 3 months later Final 25% 3 months after that then you get the keys and car Best thread hi jack ever. Link to comment Share on other sites More sharing options...
Tips Posted 7December, 2018 Report Share Posted 7December, 2018 Well it’s Tom, what do u expect 🤣 Link to comment Share on other sites More sharing options...
ELSPORTO Posted 9December, 2018 Report Share Posted 9December, 2018 On 07/12/2018 at 13:30, turboT said: $70K ono Need to start planning for the new arrival.. yep 50% upfront down payment 25% 3 months later Final 25% 3 months after that then you get the keys and car Lovely car .... Bump for Jono's 912 too - good starting price at $28k that's for sure ..... Link to comment Share on other sites More sharing options...
JonoF Posted 13December, 2018 Author Report Share Posted 13December, 2018 Engine and tranny now sold. Price for near complete roller is $22K. But yourself a $20K 3.2L out of the US and make the sickest SWB hotrod ever. Link to comment Share on other sites More sharing options...
JonoF Posted 18December, 2018 Author Report Share Posted 18December, 2018 Final price drop before I chuck it up on fleabay. $20K. Link to comment Share on other sites More sharing options...
P-Kay Posted 18December, 2018 Report Share Posted 18December, 2018 Mate, if the wheel was on the other side, I would have arranged pick-up......maybe your next project? Link to comment Share on other sites More sharing options...
9er Posted 18December, 2018 Report Share Posted 18December, 2018 I have the correct factory RHD dash and front trunk available. Link to comment Share on other sites More sharing options...
P-Kay Posted 18December, 2018 Report Share Posted 18December, 2018 You're not helping @9er!! Link to comment Share on other sites More sharing options...
JonoF Posted 19December, 2018 Author Report Share Posted 19December, 2018 7 hours ago, 9er said: I have the correct factory RHD dash and front trunk available. Any chance you have a steel hood and front bar? Link to comment Share on other sites More sharing options...
Skidmarks Posted 20December, 2018 Report Share Posted 20December, 2018 On 18/12/2018 at 13:14, JonoF said: Final price drop before I chuck it up on fleabay. $20K. How “roller” is roller? Also, has it had reg here before? 2019 project is a Group 4. Have the guard extensions and front and rear bits as well as the duck so ... will either get the 3.6 IROC motor or the 3.9 “Bathurst” motor Can you PM me and I’ll give you email details for pics and more details etc. Link to comment Share on other sites More sharing options...
JonoF Posted 22December, 2018 Author Report Share Posted 22December, 2018 Photos now added. There is also two links at the bottom of the imbedded photos. Link to comment Share on other sites More sharing options...
9er Posted 22December, 2018 Report Share Posted 22December, 2018 That is actually looking like a good deal. If I had storage I would buy it. Link to comment Share on other sites More sharing options...
JonoF Posted 23December, 2018 Author Report Share Posted 23December, 2018 4 hours ago, 9er said: That is actually looking like a good deal. If I had storage I would buy it. If I had storage, I’d keep it! Link to comment Share on other sites More sharing options...
JonoF Posted 23December, 2018 Author Report Share Posted 23December, 2018 Deposit Taken Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.